Asbestos contamination can cause health issues and
cancer is also one of the diseases that can be caused by long and constant
exposure to asbestos. Thus, asbestos detection in the house should be done as
soon as its presence in suspected. The testing is done for the asbestos
contaminated material and the air in the house. The material can be delivered
for inspection to the asbestos inspection service or asbestos testing company
can come and test the materials for asbestos fibres.
Before taking any samples for the test to send
to asbestos specialist, certain steps should be taken:
- · Make
sure that there is no scrapping, vibration or dusting of any kind around the
surface you suspect contain asbestos. There is a risk of spread of asbestos
fibres in the air because of these.
- · Before
taking the sample to deliver to asbestos testing laboratory neutralise the air
around the material by spray water. Dilute dish detergent in the water into
spray bottle and spray around the room.
- · The
asbestos abatement company Monmouth do not need a big sample of asbestos contaminated
material. A one square inch sample is enough for testing. Put it safely in the
zip lock bag. Date and address should be written on that bag. Seal the sample
taken area with lacquer and spray around I with water spray and collect these
on disposable cloth and dispose it.
The materials like tiles and
flooring can have the asbestos fibres and if you have plans about repairing in
those areas get the asbestos testing done. If the laboratory inspection says
that there is asbestos contamination then call asbestos removal company South Wales to
safely remove the asbestos.
No comments:
Post a Comment